1,600 + Last Week: Cartier and PLAT

A very hard week–ran the CTX3030, the Whites Dual Field, and the CS6PI.  Fought the seas hard for every one of these–my “coach” Roland was impressed.  Extreme sanded in conditions–had to really look around for any decent ground to work. 6 Got a Cartier band, 7.2 gr, a PT band 14.3 gr.  a 14k,  7.9 […]

Leave a comment Continue Reading →

A Cartier Band Today

750, 7.2 gr.  Seeing them going for $795 USD on Ebay.  CTX 3030 using a gold program.

Leave a comment Continue Reading →

New Book Exerpt: “Acccuracy”

16/ Accuracy This is another machine value that can be effective–but not in any situation. As with any of these tools there is a trade-off to be mediated. An accurate machine is not necessarily the one that will go the deepest. It may also mislead you due to sand or soil conditions, target inclination, masking […]

Leave a comment Continue Reading →

CTX 3030 PT finds.

59.5 Gr. PT found by my buddy over the last couple of months.  Biggest in the middle 14.7 gr.

Leave a comment Continue Reading →

Old-School Beach Machine

Still haven’t found anything deeper or as conclusive as this  Fisher CZ5 10″ coil. It’s modded with (legendary) “Mr Goldmaster” phones.

Leave a comment Continue Reading →

Welcome Facebook Friends!

Thanks for liking / viewing my page! My name is Clive James Clynick and I’ve been detecting since 1980.  In that time I’ve had the opportunity to hunt treasure and trade notes with some top pros–both in Canada and the Caribbean.  The result has been some 18 book titles on understanding shorelines, and getting results […]

Leave a comment Continue Reading →

A 77 Gram Russian Chain Found with the Minelab CTX 3030.

Quite a beautifully crafted Russian chain, 14K tri-tone 77 grams.  Found by Roland with the Minelab CTX 3030.  We’ve had good results with this detector using such settings as “Andy’s Beach” and “Jay’s Gold” programs.

Leave a comment Continue Reading →

A Nice Diamond Ring Set Found with the Minelab CTX 3030

  My buddy found this set up on the edge yesterday with his Minelab CTX 3030.  The main stone is about .80 princess cut.

Leave a comment Continue Reading →

A Good Week in the Water with the CTX 3030

These are from a week-long hunt with the CTX 3030.  Total is 1.55 ounces–26 grams of 18k.  I also used the CTX 3030 with the 17″ coil.  This coil got me down to gold that had been in the ground so long that it came out green.  

Leave a comment Continue Reading →

Scoop of My Dreams…

Thought I would put up a picture of this great custom scoop that Chuck from Sunspot Tooling made for me.  It’s a 720i, extreme angle with an aluminum / wood travel handle and a Stout’s Backsaver grip.  This scoop has gotten me a lot of gold –even in digs that others have given up on.  […]

Leave a comment Continue Reading →
WP2FB Auto Publish Powered By : XYZScripts.com